A versatile tool reciprocating saw works for cutting through wood, nail, pipes, and other materials, just about everything if you prefer. This saw is also known as the recip saw and the Sawzall brand. The back and forth motion makes it more favorable to the users. If you can utilize this saw suitably, it gives you maximum advantages.
Do you have to learn how to use a reciprocating saw? Don’t waste your time moving here and there. Concentrate on this post. It is because now we are going to share some effective steps & tips on this topic.
Ultimate Direction to Use a Reciprocating saw
Anyone who wants to use the reciprocating saw safely, he/she can do it to make sure rules and experience. Even this type of powerful and versatile saw is excellent for professional contractors. When you begin to use the reciprocating saw, you will confirm the exact blade for cutting your material. Now, we show here step-by-step directions on how to use this saw.
How to Prepare your Reciprocating Saw’s Blade?
The blade is a vital part of the reciprocating saw. Without installing the right blade, nobody works in cuts of any wood or metal. Present here different types of blades for using several purposes. Before selecting the blade, it must be known as the blade’s service and working types. Purchasing the sets of saw’s blades, you can go to the store.
Reciprocating Saw’s Blades and Cutting Purposes
Reciprocating saws come up with the difference of blades we know. That’s you can select the best one which depends on your needs. It is also essential to appoint a blade about 2–3 inches elevated from the cutting material.
Now, it’s clear what type of blade you opt for cutting your material.
What’s the importance before installing or changing the reciprocating blade?
Yes, before setting up or changing your saw’s blade you need to follow the below instructions.
- Firstly, if the saws connect to any cord or power, ensure it’s disconnecting from electrical power.
- Secondly, if this saw is wireless, make sure the saw’s switch off and withdraw the battery pack.
- Then, you can change or appoint the blade that’s necessary for avoiding any trauma.
How to Establish or Insert the Blade?
When you’re ready to insert your selected blade into the reciprocating saw, find the button or lever. Then go through these below steps-
On the end place of the reciprocating saw, you see the cylindrical metal chunk holding the blade. When you get to the red or black button, press down on that lever to open the saw’s chuck. Need to hold the button down until establishing your blade.
Have you worried about locating the button? Please go through the reciprocating saw’s manual book that helps find it.
In this step, make sure the position of the blade for leveling down toward. Slide your selected blade into the hole or slot. To ensure the blade’s place, you will go to its button or switch to stop the tug out of the chuck.
Now, it is essential to adjust the shoe for fixing the blade. Around the root of the blade, this metal piece stayed. It supports maintaining the saw as well. Also, it would help if you gripped the shoe’s sides by mashing down buttons. Expand out from the reciprocating saw slowly.
Another important thing is to fix the blade at least 2.5 cm extended than the metal density. After finishing the shoe’s adjustment, connect to the power, or insert the battery pack depending on your saw’s category.
What to do for Prepping the Cutting Material?
Before starting work need to prepare the cutting material just simply-
- You are using a marker of drawing the line where you want to cut the material. To straight cut, follow the straightedge instruction to use a compass if you need to do a curved cut.
- Next, select the cutting work surface and attach a C-clamp to tighten against the material’s working ground. It helps to fix the material. So, when you’re starting cuts, the material can’t move around. Alternatively, to cut through pipes, you can use clamps.
- Another important thing is that you must wear protection glasses while working on this reciprocating saw. Also, it makes a high sound when cutting material, so that you put in earplugs for safety.
To make the Cuts the more Fun
Making cuts using a reciprocating saw is the best job for users who want to get an exciting experience and benefits. Look at the guidance for knowing more about it.
Step-1: Holding your Saw with Both Hands
Always use both hands when you hold the reciprocating saw. Using your non-dominant hand behind the chuck aids the saw’s weight. On the other hand, using the dominant hand to handle at the rear or top of the saw balance. If you want to use one hand, the saw makes a vibrant or shake.
Step-2: Squeeze the Shoe against your Material
It is the turning position to cut the metal. At the specific place, keep your saw’s blade. Then, give some force to the shoe while starting. And, ensure the blade’s position that doesn’t touch the overall material.
Next, apply your finger to press the trigger so that your saw’s blade moves back and forth. Hold the trigger down continuously whether it reaches the high speed. That’s you get the fastest cutting benefits. Stop the blade if you’re finishing cuts.
Step-3: The Direction of the Blade through the Material
To keep the blade upright, you press the shoe against the material without forcing it. Make sure the blade works straight through along the cutting line. When you touch the end of the cuts, you can go back to the trigger.
Using a reciprocating saw to cut any type of wood or metal is a fantastic job. But while you completed cutting, you would press the button to reduce power or disconnect. Our post has presented all the necessary tips, steps, and questions about using a reciprocating saw.