If you are a carpenter looking for accuracy and consistency in one pack, then the RidgidR4210 15 Amp might be the right saw for you. It features cutting precision, Led laser, adjustable blade position, among many others. Besides, the miter saw delivers crosscuts on matching bevels from different directions, whether it’s on the trim or finish carpentry.
It may not achieve a lot for professionals, but there is much to accomplish using the miter saw as a DIY hobbyist. Well, look at this Rigid R4210 Review to learn more about this tool and what it offers.
What Makes Ridgid R4210 Miter Saw Different?
The R4210′s adjustable, all-metal depth stop gives users the freedom to use it as a circular arm saw for making accurate cuts. The engage the depth stop; all you need is to rotate the lever front and use an adjustment bolt to set the required depth. However, you can bypass this feature by turning the lever towards the rear of the saw. Then, a power cord is routed to the back to minimize interloping with the slide.
Top Reason to Buy Ridgid 10″ Dual Bevel Sliding Miter Saw
- Model : R4210
- Power Source : Corded
- Weight : 69.2 Pounds
- Bevel Type : Duel
- Bevel Range : 45 deg.
- Miter Capacity : 70 deg.
- Cross Cut (90) : 2 x 12 in.
- Cross Cut (45) : 2 x 8 in.
- Crown Cut : 6-5/8 in.
- Blade Size : 10 in.
- Blade Spin : 4000 rpm
- Motor : 15 amp
- Fence Hight : 5-1/2 in.
- Arbor Size : 5/8 in.
- Dust Port : 1-1/4 Inch
WI Jack, United States
“This is my third week am using the Ridgid R4210, and it seems to have everything that was claimed. A powerful and durable tool. It’s user-friendly and easy to adjust. The dual Led system makes cutting the intended surface smooth and accurate. However, minor improvements to the dust collection system will make it better. The dust collection ends at the end of the rails.
Most Important Technical Features
Impressive Features of Ridgid R4210
- Very accurate
- Ideal for beginners and professionals
- LED light casts a shadow
- Quality build at competitive price
Impressive Features of Ridgid R4210
- Poor dust collection
Our reviewed another 10 inch compound miter saw you can get this as an alternative- Kobalt 10 Sliding Miter Saw Review and Best Ryobi Sliding Miter Saw Review: What Makes It Special
The saw features a 15-amp motor with enough power to deliver 4000rpm. The benefit of this motor is a more stable cutting speed in though wood. This makes it ideal for professionals who need a smooth finish cut in hardwood.
This saw offers a combination of cut capacities. As far as crosscuts can go, you can make 2 x 8 inches at 45-degree. At 90 degrees, you can cut 4 x 4 inches. Also, a back fence design cuts a (H X W) 2×12 at 90 degrees. Crown cuts up to 6-5/8 inches.
Crosscut Positioning System
Instead of one, there are two ultra-bright LED lights located on the upper blade. This allows for a bright shadow line to be cast on the surface of the material you are working on. Even in bright daylight, the separate laser works perfectly. The saw allows you to switch off the system when not using it. Besides, you can change the blades with no realignment of the cross-cutting system required.
Mitering and Beveling!
The miter ranges from 0-70° in both directions, with crown molding breaking to accommodate various cuts. The miter crown halts at common angles ranging 0°, 15°, 22.5°, 31.6°, 45°, 60° and 67.5°. This offers positive stops that are locked with the front knob. This feature can be bypassed with an override past the common angle stops.
The saws dual bevel system is designed with the ultimate precision necessary for fine woodworking. The bevel capacity ranges from 0-45° with regular angles of 0°, 15°, 22.5°, 33.9°and 45°, both on the right and left. An added bonus is the saw base fence support and linear ball bearings for accurate slide operation.
The vertical handle on the saw is highly ergonomic. You will find it very comfortable to use, especially when working for long periods. The handle also helps to dampen the vibrations of the saw by far. In addition, you can perform using both arms for more flexibility.
Zero clearance system
Zero clearance system allows you to work while the saw is placed close to the wall. While the saw is quite heavy, the saw features a small radius of usage.
Which is Better Between Ridgid R4210 vs DeWalt DWS779 Miter Saw?
One of the features that will get you to purchase the Ridgid R 4210 is the lifetime service agreement. For this, you get your miter saw serviced at a certified dealer whenever you want for life. On the other hand, you are hoping for performance and features when opting for DeWalt DWS779. Still, even Ridgid doesn’t disappoint on this.
In terms of its overall construction, Ridgid feels very sturdy and durable. You have less to worry about having to change to your unit after every few months. In terms of Size and Weight, the Dewalt is lighter by 8 lbs. It also features small dimensions making it ideal for those looking for a portable miter saw to cut wood.
The Ridgid R4210 has a maximum of 4,000 RPM, which is higher than the DWS779 speed. The maximum Bevel for Ridgid leads in the industry with a miter range of 0-70 degrees on both the right and left. On the other hand, the DWS779 miter capacity goes up to 48 degrees in both directions. If you need to cut thicker boards, the DeWalt DWS779 is recommended. While the R4210 cuts only 4 inches, DeWalt can cut up to 6.75 inches board.
An additional benefit of Ridgit is the ultra-Led light for the clear-cutting position. The DWS779 features no laser light for cutting accuracy. This makes it difficult to see clearly, especially in a poorly lit area.
The Bottom Line
We tried to disclose everything in the Ridgid R4210 review to make you understand why it’s the best choice. Both the r4210 highly function dual bevels ideal for any woodworker. It’s user-friendly and boasts a large amount of power for cutting tough material. For trim carpenters and professional woodworkers looking to cut medium materials, the saw definitely wins.
Besides, the blade angles of the miter saws adjust on matching slopes in both directions. This will allow you to make identical bevel cuts without having to flip your workpiece.