How to Prevent Table Saw Kickback and Injury

Table Saw Kickback

Are you fully aware of ways to prevent kickbacks? Most woodworkers understand the importance of preventing table saw kickbacks. But they don't have much idea about it. So you need to know more about why this kickback occurs and how to avoid it. You came today to learn the ways to prevent. Don't worry; we will get rid of all the confusion about this.

Why does my Table Saw Kickback?

When the wood gets stuck with the saw blade, and in the process, it comes back to the operator. In most cases, the stock bids itself to the edge. A dull corn blade appears as a result of kickbacks. Also, it occurs when the wood is over-torn.

Kickbacks create wood flying at high speeds, and it can damage equipment as well as injure you or other people. To prevent these, you need to know the various causes of kickbacks. Kickback injuries can be devastating, causing damage to the limb of the person working with the saw.

How do You Stop a Kickback on a Table Saw?

Kickback is not a common issue. It can be a significant danger, so you need to prevent its. Now I will tell you six tips to avoid kickback which if you apply you can prevent it. So let's get started!

Use a Riving Knife

The first and most important way to avoid kickbacks is to use a captain's knife on your table. The reason for the kickback is the teeth on the back of your blade.

It is a curved attachment that locked behind the blade—this knife designed to prevent stock-flow in the teeth.

Kickback Preventing with Riving Knife

Image Credit: WoodCraft

Riving knives closely follow the curvature of the blade. Move the edge as you adjust the border up or down - and try to stay side by side when you need to cut the blade. These are essential ways to reduce the risk of kickbacks.

The riving knife is currently cheaper, and it comes with modern table saws while this may seem unnecessary, the best way to prevent table kickbacks.

Does a Riving Knife Prevent Kickback?

Riving knives secure table saws as well as reduce kickbacks. The rolled knife raises and lowers the blade. It works by keeping the teeth close and maintaining the position of the workpiece to prevent kickback.

You can't underestimate the importance of a corn knife on a table even if you want to. It goes up and down with a rolled knife blade, and it stays at the same distance behind the blade which keeps the table from kickback.

Take the Right Position

A meaningful way to avoid table tax kickbacks is to position your body correctly. You better stand next to the stock than directly behind. No table should stand straight with the blade while working. Make sure you stand next to the blade as you feed the stock. It will allow you to protect yourself if there is a possibility of a kickback.

It is better not to stand during kickbacks.

Make Sure the Fence is Perfectly Parallel to the Blade

If the fence not fully aligned with the blade, it is possible to increase the risk of kickback by angling the speed of the stock towards the back of the blade.

Reduce the risk by setting the bed perfectly parallel to the blade. If it is not possible to get perfect accuracy, the level of error should be pressed at an angle away from the blade as soon as you touch it.

Use a Push Stick

The push stick helps you apply the required amount of pressure.

It would be best if you used a push stick to pull small pieces of stock. This way, you no longer have to remove the part with your hands, and you will be protected.

Using a push stick reduces the risk of your hand pressing against the blade. If a kickback occurs, your hand cannot be pulled towards the blade to avoid any serious injury. Unexpected stress can often lead to it.
Pushblock for Preventing Kickback

Image Credit: WoodCraft

Use a Sharp Blade

It is essential to use a sharp blade to keep yourself safe at all times. It is because using a blunt blade can increase the chances of the stock getting caught in the teeth and thrown at you. So it would be best if you did not work with dull blades as this can lead to an accident.

Table Saw Sharp Blade

Keep the Table Clean from off-cut

It would help if you always kept your table clean and tidy to avoid any accidents. It is essential to make sure your waste removed after each cut is made and before the next cut.

How Fast is a Table Saw Kickback?

Typically, the circumference (circumference) of a 10-inch saw blade is 31.4 inches. When the taxonomy blade travels at 4,800 revolutions per minute (RPM), its teeth travel 150,720 inches per minute. Or let's say it's 9,043,200 inches per hour or 142.72 miles per hour! Again, table blades also prove to be damaged by some loads of motion. If 15% of the speed is still lost, it is usually 120mph. Yet a stock piece driven by a blade running at that speed is likely to spread too much distance and inertia, and it can become a very dangerous breed.

Conclusion

Kickbacks are not something to be ignored. As a result, countless people injured every year. Therefore, it is essential to take proper precautions against these dangers. So preventing kickback is most effective. The benefits of following kickback prevention methods, even if you have some costs, are worth it.

Leave a Comment